What are the three points of a forklift that make up the stability triangle?

The three points are the two front wheels and the pivot point of the rear axle. Connect the three points, and you have what’s called the stability triangle.

Where is the stability triangle on a forklift?

The points are found over both of the two load (front) wheels and midway between the rear wheels. When imaginary lines are drawn to connect them, what’s known as the stability triangle is formed.

What are the three major parts of a forklift?

What are the three major parts of a forklift? The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift. What are the prongs on a forklift called? Forks, Also known as the tynes, the forks on a forklift are used to make direct contact with a load for transport.

What affects forklift stability?

Load weight, weight distribution, size, shape, and position are key factors affecting the stability of the forklift. Forklifts are designed to carry a capacity load at a standard load center, commonly 24 inches.

IT IS INTERESTING:  Why don t tanks use autoloaders?

What are the components of a forklift?

Forklift Parts 101: Common Parts & Terms

  • Cab: The cab is the central part of the forklift. …
  • Carriage: The carriage mounts the forks to the mast and serves as a support structure for the forklift.
  • Mast: The mast is the part of the forklift that lifts and lowers the load. …
  • Load Backrest: …
  • Forks: …
  • Overhead Guard: …
  • Tires: …
  • Counterweight:

What are the three major points of the stability triangle?

The three points are the two front wheels and the pivot point of the rear axle. Connect the three points, and you have what’s called the stability triangle. One major difference between a forklift and a car is stability. Almost all counterbalanced powered industrial trucks have a three-point suspension system.

What is the load center on a forklift?

The load center is the distance from the face of the forks to the load’s center of gravity. Many forklifts are rated using a 24-inch load center, which means that the load’s center of gravity must be 24 inches or less from the face of the forks.

What is 3 stage mast in forklift?

3-Stage – A three stage mast, or triplex, is the most versatile forklift mast and also the most popular. The outer rails allow for free lift, and the two inner sections can lift loads higher than a two stage.

What are the forks on a forklift called?

Also known as the tynes, the forks on a forklift are used to make direct contact with a load for transport. They are attached to the forklift carriage and are designed to carry a load from the bottom. Forklift forks come in all shapes and sizes. There is a wide variety of fork types available for various applications.

IT IS INTERESTING:  Are forklifts road legal?

What is another name for a forklift?

A forklift (also called lift truck, jitney, fork truck, fork hoist, and forklift truck) is a powered industrial truck used to lift and move materials over short distances.

How is forklift capacity calculated?

A load center is the horizontal distance from the vertical face of the forks to the center of gravity of the load. As a general rule, load center is 24″ from the face of the forks (the center point of standard 48” x 48” pallet). Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs.

How can a forklift be overturned?

WHAT CAUSES FORKLIFT OVERTURNS? — Turning, stopping or pushing the go pedal too quickly. — Driving on an incline. — An unbalanced load, driving with a load too high or a load too heavy for the equipment.

What is a forklift hazard?

Forklift hazards often occur when there is a change of balance for the vehicle. Lifting materials up high can cause the machine to overturn or for its load to fall. … If your warehouse forklift has to lift workers at any time, ensure that the correct attachments are used to reduce the risk of a fall or other injuries.

How many types of forklift are there?

Forklift Classifications

There are seven forklift classes outlined by the Occupational Safety and Health Administration (OSHA) that describe their fuel option and use.

What are the controls on a forklift?

Locate each control and understand how to use each one.

  • Forward/Reverse Directional Controls. The directional control allows the operator to move the forklift forwards or backwards. …
  • Hydraulic Lift Controls. Forklifts have hydraulic lift controls to raise and lower the forks and to tilt the forks. …
  • Pedals. …
  • Parking Brake.
IT IS INTERESTING:  Is a hydraulic engine Jack safe to use?

What are tines on a forklift?

Forklift forks, also known as tines or blades, are used to lift and carry loads. They are an integral part of the forklift and ensuring you are using the correct ones and that they are in good condition is essential to both the safety of personnel, but also the forklift and the load.

Vira!