How do you clear error codes on Yale forklift?

How do I reset my Yale forklift password?

  1. Looking to change the password on your Hyster or Yale forklift? …
  2. Turn the ignition key to the on position.
  3. Press the star button (*) three times. …
  4. Enter the forklift password and press the star button (*).
  5. Now that you’re in the service menu, press the 4 or 5 button to go back 1 level if need be.

How do you decode a Yale forklift serial number?

To figure out the year your Yale forklift was manufactured, you’ll need to read the serial number and look for a letter in the last position. In the example image the serial number is B875B04662D. The last letter in the serial number is D so using the legend below, the year of manufacture is 2006.

How do you clear the error code on a Nissan Forklift?

To erase your Nissan forklift codes, the repairs must first be made. Following the necessary repairs, return to Diagnostic Mode. Hold the accelerator down for a minimum of 10 seconds, then release the accelerator and the Nissan forklift codes should be erased.

IT IS INTERESTING:  Can power steering fluid be used in a hydraulic jack?

How can I speed up my Yale forklift?

hello, your instructions are very similar to what i received for Yale MPE’s or MPW’s.

  1. Press horn button, turn on key, horn will sound.
  2. Release horn button, press Lift or Lower to adjust speed setting.
  3. Horn will sound 1 for low, 2 for medium, 3 times for fast.
  4. Lower handle completely…setting is now saved.
  5. Turn off.

How do I change the time on my Yale forklift?

Click Date & Time in the sidebar to open the panel. If you have the Automatic Date & Time switch set to on, your date and time should update automatically if you have an internet connection. To update your date and time manually, set this to off. Click Date & Time, then adjust the time and date.

How do you read a Clark forklift serial number?

Don’t panic. A Clark forklift’s serial number can be found physically stamped right on its frame. Often, this number is stamped in the left-hand frame member of the chassis. For example, to the right is the frame stamp from the forklift shown above.

What engine is in a Yale forklift?

Yale offers the GM 2.4 as well in models like GLC050VX or GLP50VX though most Yale dealers have a preference: the Mazda FE forklift engine. Yale has used Mazda forklift engines for years and most Yale service personnel will tell you they think it’s a tough, durable engine.

How can I tell how old my forklift is?

Since 1995, the last character (letter) of a Hyster or Yale forklift serial number designates the year of manufacture. The letters “I,” “O,” and “Q” are not used since they are easily misread.

IT IS INTERESTING:  What is the third pedal on a forklift for?

How do you reset a Nissan ECU?

  1. Turn ignition “ON” (without starting vehicle), count to 3 seconds.
  2. Depress/Release accelerator pedal 5 times… …
  3. Count to 10 seconds (not 7!) and fully depress accelerator pedal.
  4. Count to 12 seconds (SERVICE ENGINE SOON should be blinking), release accelerator pedal.
  5. Count to 10 seconds, depress accelerator pedal.

How do I reset my tiida ECU?

Turn the ignition key to the “On” position, without starting the engine. Wait three seconds. Depress and release the gas pedal five times in five seconds, then let the pedal up. Count seven seconds and then depress the gas pedal and hold it down for 10 seconds.

How do I reset my Nissan?

To reset the light and computer, you repeating steps one and two. Except for this time when the light starts to flash, simply hold the gas pedal down until the flashing stops. Again, you turn the ignition to off. Your computer should be reset and the light should have disappeared.