What is girder in EOT crane?

The EOT Crane moves over the rails placed on the top of crane runway or Gantry Girders. The crane mainly comprise of bridge girder made from rolled sections such as I beams / U beams or fabricated box section. The bridge girder is supported on two end carriages, each housing a pair of wheels.

What is girder in Crane?

A single girder crane has only one bridge beam, and the hoist trolley operates or travels on the lower flange of the bridge girder. · A double girder crane will have two bridge beams, and the hoist trolley travels on rails, usually attached to the tops of the crane girder.

What is single girder EOT crane?

Single Girder EOT Crane have only 1 No. Main Girder across the span. … It consist of Electric Hoist travelling on lower flange of Main Girder and not required rail for cross traveling. It consist of a crab mechanism travels above both girders run over cross travel rails with platform to maintain all parts of crab.

IT IS INTERESTING:  How do crane operators get up?

What is LT and CT in Crane?

LT motion : Long Travel Motion. CT motion : Cross Travel Motion. Bridge : the structural portion on which the trolley/crab moves. LT End carriage : Structure which houses Long Travel Wheels. CT End carriage : Structure which houses Cross Travel Wheels.

Which motor is used in EOT crane?

While series DC motors consume more power than PMDC motors to produce their electromagnetic field, they’re powerful, efficient at high speeds and produce the most torque; hence, they are used for heavy duty winches. Shunt DC motors are used in constant speed applications, 18 such as reel drives.

What does girder mean?

A girder is simply a type of support beam. It is the main horizontal support of a structure or the large beam that supports smaller beams. … Girders may also take on a box or Z shape, as well as other forms. The industry typically uses girders to build bridges, as well as trusses for buildings and other structures.

What is span of Crane?

The crane span is the measured center-to-center distance between the runway beams. … An overhead crane’s span is essentially its width across the bay—or the measured center-to-center distance between the runway beams.

What is full form of EOT crane?

Electric overhead traveling crane or EOT crane is one of the most common types of overhead crane, or called bridge cranes, which consist of parallel runways with a traveling bridge spanning the gap.

How many types of EOT crane are there?

There are various types of EOT (electric overhead travel) cranes 1. Single Girder EOT Crane 2. Double Girder EOT Crane Single Girder EOT Crane – Sparkline manufactures and supplies a wide range of single girder EOT cranes in various configurations according to customer requirements.

IT IS INTERESTING:  How are high rise cranes dismantled?

How does EOT crane work?

EOT Crane Working Principle

1. … The ring gear of drum transmit driving force to drum set, then through wire ropes and pulleys drive crane hook up and down, so as to finish the lifting of the heavy objects up and down. 2. Transmission of crane Trolley traveling system: the driving force of crane trolley is from motor.

What are three functions of a crane?

The main purpose of a crane is to lift extremely heavy amounts of weight. A typical crane is equipped with a hoist rope, wire ropes or chains and sheaves.

Modern day cranes are used for:

  • Construction Materials.
  • Bridges.
  • Railroad Tracks.
  • Shipping Materials/Equipment.
  • Cars.
  • Scrap Metal.
  • Mobile Homes.

5 нояб. 2015 г.

What are the main parts of a crane?

The Various Functions of Mobile Crane Parts

  • The Driving Components. In any mobile crane, one of the common components will be the driving system used to make it mobile. …
  • The Operator’s Cabin. The operator’s cabin houses all of the crane’s controls. …
  • The Boom. …
  • Hoist and Hook. …
  • Hydraulic Pump. …
  • Outriggers and Counterweights.

6 февр. 2020 г.

What is crab in EOT crane?

The lifting crab of a EOT crane is an independent two motion machine and consists of the hoist machinery built on to a frame, which is mounted on runner wheels, and driven by a motor through suitable gearing. The crab is also known as trolley. … The motion of the crab is derived from an electric motor.

How does a DC fan work?

The direct current fans, or DC fans, are powered with a potential of fixed value such as the voltage of a battery. … In contrast, the alternating current fans, or AC fans, are powered with a changing voltage of positive and of equal negative value. In general, this changing voltage has sinusoidal shape.

IT IS INTERESTING:  Is a crane a complex machine?

What is used in crane?

The most important substance used to manufacture cranes is steel. Steel is an alloy of iron and a small amount of carbon. For structures that do not require very high strength, a common form of steel known as carbon steel is used. By definition, carbon steel contains less than 2% of elements other than iron and carbon.

Which motor is used in textile industry?

Loom motor for shuttle loom is highly demanded in the textile industry. We offer these motors in 62 inch and 72 inch power looms. The electric loom motors have a high starting torque as well as compact body.

Vira!