What is a single girder crane?

A single girder crane has only one bridge beam, and the hoist trolley operates or travels on the lower flange of the bridge girder. · A double girder crane will have two bridge beams, and the hoist trolley travels on rails, usually attached to the tops of the crane girder.

What is single girder EOT crane?

Single Girder EOT Crane have only 1 No. Main Girder across the span. … It consist of Electric Hoist travelling on lower flange of Main Girder and not required rail for cross traveling. It consist of a crab mechanism travels above both girders run over cross travel rails with platform to maintain all parts of crab.

What is crane girder?

A bridge crane is a type of overhead crane that includes two or more overhead runways built into the building’s support structure. Bridge cranes have different configurations and can be comprised of one or two beams—more often referred to as a single girder or double girder design.

IT IS INTERESTING:  Which motor is used in EOT crane?

What is the difference between a crane and a hoist?

A Crane is a complex device used for moving loads in various directions. … While a hoist by itself can only raise and lower objects on a vertical plane, it is the component used for that purpose as part of a crane’s wider application. Hoists, as well as cranes, are typically used in a construction or industrial setting.

What is the difference between a bridge crane and gantry crane?

Bridge cranes provide a lifting mechanism on an elevated rail for applications that require all processes off the floor. … Meanwhile, gantry cranes provide overhead lifting from a structure with legs and casters on the floor, either running in a track or trackless.

What is full form of EOT crane?

Electric overhead traveling crane or EOT crane is one of the most common types of overhead crane, or called bridge cranes, which consist of parallel runways with a traveling bridge spanning the gap.

How many types of EOT crane are there?

There are various types of EOT (electric overhead travel) cranes 1. Single Girder EOT Crane 2. Double Girder EOT Crane Single Girder EOT Crane – Sparkline manufactures and supplies a wide range of single girder EOT cranes in various configurations according to customer requirements.

Which motor is used in overhead crane?

While series DC motors consume more power than PMDC motors to produce their electromagnetic field, they’re powerful, efficient at high speeds and produce the most torque; hence, they are used for heavy duty winches. Shunt DC motors are used in constant speed applications, 18 such as reel drives.

IT IS INTERESTING:  How do you calculate load lifting capacity of a crane?

What is the hook on a crane called?

A lifting hook is a device for grabbing and lifting loads by means of a device such as a hoist or crane. A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.

How do you make an overhead crane?

Design Guide for Overhead Cranes

  1. A traveling base with a traveling rail on either side. …
  2. The End carriage on both sides which houses the wheel for the crane movement and also supports the top girder. …
  3. The Top Girder provides the side movement of the hoist and trolley.

29 мар. 2010 г.

What is the end of a crane called?

JIB CRANE – A crane design whereby the bridge girder (commonly called the boom) is fixed at one end, allowing the opposite end to cantilever. The fixed end generally is hinged to allow rotation. LIFT – Maximum safe vertical distance through which the hook, magnet, or bucket can move.

What are the types of cranes?

Various Types

  • Telescopic Crane. A telescopic crane offers a boom that has a number of tubes that are fitted inside each other. …
  • Mobile Cranes. …
  • Truck Mounted Crane. …
  • Tower Crane. …
  • Rough Terrain Crane. …
  • Overhead Crane. …
  • Loader Crane.

29 нояб. 2017 г.

What is the jib of a crane?

What is a Jib Crane? It is a crane with a horizontal member, commonly known as the jib or boom. A jib is an operating arm that extends horizontally from the crane. The role of the jib is to support a movable hoist fixed to either a wall or pillar mounted on the floor.

IT IS INTERESTING:  Do you need to be certified to operate a crane?

How much can a gantry crane lift?

They have spans of 140 metres (460 ft) and can lift loads of up to 840 tonnes (830 long tons; 930 short tons) to a height of 70 metres (230 ft).

What is meant by gantry crane?

A gantry crane is a type of overhead crane with a single or double girder configuration supported by freestanding legs that move on wheels or along a track or rail system. Gantry cranes are usually considered when there is a reason not to incorporate an overhead runway system.

What does a gantry crane look like?

A gantry crane is similar to a bridge crane, but instead of moving on suspended runways, the crane uses legs to support the bridge, trolley, and hoist. These legs travel on rails that are embedded in, or on top of the floor or ground structure.

Vira!