What are the components of a crane runway system?

The crane runway girders, crane, columns and building frames can all be regarded as components of the overall crane installation. The individual components cannot be designed in isolation from the whole, as is sometimes the case.

What is a crane runway?

Top running crane runway systems are typically used for top running single girder cranes along with top running double girder cranes. … Generally, this runway style typically uses ASCE Rail or square bar that is affixed to the top of a structural beam as a running surface for the top running crane.

What are the components of a crane?

Some of these parts and their functions include:

  • The Driving Components. In any mobile crane, one of the common components will be the driving system used to make it mobile. …
  • The Operator’s Cabin. The operator’s cabin houses all of the crane’s controls. …
  • The Boom. …
  • Hoist and Hook. …
  • Hydraulic Pump. …
  • Outriggers and Counterweights.
IT IS INTERESTING:  How does a crane operator get up there?

6 февр. 2020 г.

What are the three major components of a typical overhead crane system?

Category 2 and 3 Crane Components The principal parts of overhead traveling cranes are: bridge girders, end trucks, trolley with hoisting mechanism, and operator’s cab or pendant control.

What is the hook on a crane called?

A lifting hook is a device for grabbing and lifting loads by means of a device such as a hoist or crane. A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.

How much clearance must be maintained between a crane and obstructions around it?

Clearance from obstruction. Minimum clearance of 3 inches overhead and 2 inches laterally shall be provided and maintained between crane and obstructions in conformity with Crane Manufacturers Association of America, Inc., Specification No.

What is Crane span?

The crane span is the measured center-to-center distance between the runway beams. … An overhead crane’s span is essentially its width across the bay—or the measured center-to-center distance between the runway beams.

What are the three functions of a crane?

The main purpose of a crane is to lift extremely heavy amounts of weight. A typical crane is equipped with a hoist rope, wire ropes or chains and sheaves.

Modern day cranes are used for:

  • Construction Materials.
  • Bridges.
  • Railroad Tracks.
  • Shipping Materials/Equipment.
  • Cars.
  • Scrap Metal.
  • Mobile Homes.

5 нояб. 2015 г.

How many types of EOT crane are there?

There are various types of EOT (electric overhead travel) cranes 1. Single Girder EOT Crane 2. Double Girder EOT Crane Single Girder EOT Crane – Sparkline manufactures and supplies a wide range of single girder EOT cranes in various configurations according to customer requirements.

IT IS INTERESTING:  What does the competent person look at when inspecting the crane?

What are different types of cranes?

Here are 7 crane types that are used commonly depending on the project, work objective and environment.

  • Telescopic Crane. A telescopic crane offers a boom that has a number of tubes that are fitted inside each other. …
  • Mobile Cranes. …
  • Truck Mounted Crane. …
  • Tower Crane. …
  • Rough Terrain Crane. …
  • Overhead Crane. …
  • Loader Crane.

29 нояб. 2017 г.

Which motor is used in overhead crane?

While series DC motors consume more power than PMDC motors to produce their electromagnetic field, they’re powerful, efficient at high speeds and produce the most torque; hence, they are used for heavy duty winches. Shunt DC motors are used in constant speed applications, 18 such as reel drives.

What is the full form of EOT crane?

Electric overhead traveling crane or EOT crane is one of the most common types of overhead crane, or called bridge cranes, which consist of parallel runways with a traveling bridge spanning the gap.

What is the purpose of overhead crane?

To move extremely heavy or bulky loads through the overhead space in a facility, instead of through aisles or on the floor, an overhead crane (also called an industrial crane, crane, or overhead traveling crane is a machine that lifts, lowers and moves a load horizontally.

What is the end of a crane called?

JIB CRANE – A crane design whereby the bridge girder (commonly called the boom) is fixed at one end, allowing the opposite end to cantilever. The fixed end generally is hinged to allow rotation. LIFT – Maximum safe vertical distance through which the hook, magnet, or bucket can move.

IT IS INTERESTING:  What wind speed can a mobile crane work in?

Which two cranes use a lattice boom?

There are three types of lattice boom cranes.

  • The crawler crane has the advantage of moving with loads for a short distance. Its maximum capacity is 1.600T. …
  • The outrigger crane consists of the pedestal crane and the truck crane. …
  • The third type is the ring crane.

Who can operate a crane?

Operators of most cranes above 2,000 lb. capacity when used in construction will need to be either certified by an accredited crane operator testing organization, such as the National Commission for the Certification of Crane Operators (NCCCO), or qualified through an audited employer program [§ 1926.1427(a)].

Vira!