Can You Use a Boom Lift as a Crane? Boom lifts and cranes are made for different jobs, and therefore, not designed to perform the same tasks. A boom lift does not have the same lifting and moving power as a crane, and a crane is unable to accommodate workers.
Is a boom lift a crane?
At many jobsites boom lifts and cranes are used to reach a working area at height and lift and lower loads. Boom lifts are used to elevate workers and tools, for all kinds of tasks where a safe and stable elevated working platform is needed. …
What is the difference between a crane and a boom truck?
These cranes are designed for a construction project’s early stages. They travel on rough terrain with large wheels. Whereas boom trucks can move independently, you must use a heavy haul trailer to transport rough terrain cranes.
Can you use a boom lift as an anchor point?
The Genie guidance letter also allows the boom to be used as a fall restraint device. This enables operators to exit the platform to perform work on structures, as long as the pitch is no greater than 4:12 (18°), while using the boom platform as a tie-off anchor.
What is a boom lift used for?
A boom lift is essentially a type of aerial work platform used by personnel to reach high places. A basic boom lift consists of a platform, or bucket, with a long, jointed crane run by a hydraulic lift system and attached to a grounded base.
How far can a boom lift reach?
The smallest models are 40 feet tall, while the largest telescopic boom lifts are 180 feet tall. A 40-foot machine has a maximum range or horizontal reach of about 34 feet, and a 120-foot boom lift has a range of 75 feet.
What is the difference between a cherry picker and boom lift?
A Cherry Picker is a trailer mounted boom lift with four outrigger legs which can be towed to a location. A Boom Lift is generally self-propelled, meaning it can be driven around and used on the job whilst elevated in the air but must be transported from site to site by a truck.
How much can a crane truck lift?
To achieve the 8,000 lbs load capacity, the crane must be at an 80 degree angle, with no extra extension (in this case, the boom will be raised 13 ft, without extension). If the crane remains in the same 80 degree angle, but it is extended to 20 ft, the maximum weight capacity decreases from 8,000 lbs to 3,500 lbs.
Do you need a CDL to drive a boom truck?
A driver must have a CDL to operate a vehicle with a gross weight over 26,000 lbs. So, bucket trucks or digger derricks weighing less than 26,000 lbs will be legal to operate without a commercial driver’s license.
How much does a boom truck operator make?
Hourly Wage for Boom Truck Operator Salary
|Percentile||Hourly Pay Rate||Location|
|25th Percentile Boom Truck Operator Salary||$18||US|
|50th Percentile Boom Truck Operator Salary||$20||US|
|75th Percentile Boom Truck Operator Salary||$24||US|
|90th Percentile Boom Truck Operator Salary||$27||US|
Does OSHA require a harness in a boom lift?
Employers must ensure that employees using personal fall arrest systems while working on aerial lifts at heights six feet or more above a lower level comply with §1926.502(d) of subpart M, specifically: … Use of a body harness with a lanyard (fall arrest system).
Do you have to wear a harness in a boom lift?
“A body belt shall be worn and a lanyard attached to the boom or basket when working from an aerial lift”. It is important to note that as of January 1, 1998, body belts are no longer acceptable as part of a personal fall arrest system. A full body harness is required.
Why you shouldn’t wear a harness in a scissor lift?
For instance, if a scissor lift operator is wearing a harness and goes over a lift’s guardrail, he or she could inadvertently create enough force to cause the machine to tip over. In this scenario, the operator could put himself or herself and bystanders in danger.
Can a boom lift tip over?
Though very rare, it is also possible for boom lifts to tip over. Keeping the area under and around the boom lift clear will help ensure that no one is hurt if the entire structure tips over.
Can you use a boom lift on uneven ground?
Operating your boom lift or scissor lift on a slope can be extremely dangerous. If possible avoid elevating on slopes – the risk of a tip over increases as you elevate the platform or bucket. In fact, we typically recommend you only use your aerial lift on a firm, level surface.
Why is it called a boom lift?
The History of Boom Lifts
Thornton-Trump called the boom lift the Giraffe, but the name cherry picker stuck because people often used it to pick fruit, including cherries, from tall trees in orchards. … Some boom lifts can even move like a crane to reach up and over obstacles.